Identify a Vase or Pottery from a Photo by Its Mark

0

๐Ÿ”Ž Reverse Image Search

Image search techniques made simple: upload a photo or paste a URL and search 6 engines at once. 100% free, nothing stored.

๐Ÿ”’ Your image is never stored on our servers longer than 24 hours and is never shared.

You found a vase at a car boot sale, in a charity shop, or in a relative’s cupboard, and you want to know what it is. The fastest way to find out is to turn the vase over. The mark on the base, the backstamp, the impressed letters, or the painted signature, is the one clue that can name the maker, narrow the date, and tell a genuine piece from a copy. A photo of that mark, run through a reverse image search, can do in minutes what used to take an afternoon in a reference library.

Short answer: To identify a vase from a photo, photograph the full vase, a close-up of the rim, and a clear shot of the mark on the base, then reverse-search the mark photo with Google Lens and TinEye. Match the mark against a maker’s-mark database, check the country wording for a date range, and confirm with the clay, glaze, and style. Other identifier apps, such as Curio, and general object-detection tools, such as Aspose, scan the whole piece and guess from its shape, but they cannot read a backstamp the way a reverse search of the mark itself can.

This guide walks through the whole method, step by step, with a real worked example: a Royal Doulton Bunnykins backstamp photographed and reverse-searched live, with the honest counts from both engines. It also corrects two mark-table errors that the top-ranking guide currently prints, because a wrong date range is worse than no date range at all.

What should you photograph first?

Answer capsule: Take three photos before anything else: the full vase in profile, a close-up of the rim, and a clear, square-on shot of the mark on the base.

Most identification attempts fail before the search starts, because the photos are wrong. A vase photographed at an angle, in dim light, or with the base hidden gives a search engine nothing to match. Take your time here. It is the cheapest part of the job.

Start with the full profile. Put the vase on a plain surface, in daylight, against a plain background, and photograph it straight on so the whole shape is visible, from foot to rim. Shape is one of the strongest signals a search engine has. A baluster vase, a moon flask, and a ginger jar look nothing alike, and the shape alone can rule out whole factories.

Next, photograph the rim and the neck in close-up. Chips, glaze runs, and the way the rim is finished all help, and the rim is where a lot of fakes give themselves away. A hand-painted rim line that wobbles slightly is normal on an old piece. A perfectly even printed line on a piece claimed to be 19th century is a warning sign.

Finally, photograph the base. This is the photo that matters most. Turn the vase upside down on a soft cloth, wipe the base clean, and photograph the mark straight down, filling the frame. Use daylight, not flash, and take two or three shots at slightly different angles so at least one is sharp. If the mark is impressed rather than printed, tilt the vase a little so low light rakes across the mark and the letters cast a small shadow. That trick, photographing an impressed mark under low, raking light, is the oldest one in the book, and it still works.

Do not photograph the mark through glass, and do not crop it so tight that the words around the edge are cut off. The country wording, “England”, “Made in Japan”, “NIPPON”, sits around the mark more often than inside it, and it is the wording that dates the piece.

How do you read a maker’s mark?

Answer capsule: A maker’s mark is one of four things: a printed backstamp, an impressed mark, an incised mark, or a painted signature. Work out which type you have first, because each one is searched and dated differently.

What is a backstamp? A backstamp is the maker’s mark printed, stamped, or painted on the underside of a piece of pottery or porcelain. It usually names the maker, and often adds a pattern name, a country of origin, and sometimes a date code. Collectors also call it a maker’s mark, a factory mark, or a base mark. The same idea on glass is usually an etched or moulded signature instead. If the piece is glass rather than pottery, also look at the base for a pontil mark, mould seams, bubbles and wear rings, which separate hand-blown glass from mould-pressed or modern pieces.

Printed backstamps are the most common. They are applied in underglaze blue, black, green, or red ink before firing, so they sit under the glaze and cannot be rubbed off. A printed mark that sits on top of the glaze, or that flakes when you run a fingernail across it, was added later. That is one of the simplest fake tests there is.

Impressed marks are pressed into the clay while it is still soft, before firing. Wedgwood’s “WEDGWOOD” impression is the famous example. They are harder to photograph, which is why the raking-light trick matters, but they are also harder to fake well, because a forger has to press the mark into wet clay at the right stage.

Incised marks are cut into the clay with a tool, usually a signature or a pattern number, and they look hand-drawn rather than stamped. Painted marks are brushed on by hand, often a painter’s initials or a small symbol next to the factory stamp. A painted mark that matches a known painter’s hand can be as useful as the factory stamp itself.

Write down exactly what you see before you search. Letter by letter, including anything you cannot read, marked as unreadable. “Crown over a circle, 51 below, letters I cannot read” is a better search query than a guess. Guessing a name and searching for it only finds the guess.

How does a reverse image search identify a vase from a photo?

Answer capsule: Upload your mark photo to Google Lens and TinEye, then read the results like a detective: the oldest matches, the pages that name the maker, and the listings that show the same mark are the ones that count.

Open Google Lens in the Google app or in Chrome, upload your mark photo, and look at the matches. Then do the same on TinEye, which is better at one specific job: sorting results by the date they were first seen online. That oldest-first sort is what turns a pile of shopping listings into a dating tool. A mark first indexed in 2009 on a collector’s dating guide is worth more than the same mark on a hundred shop listings from this year.

Run the search on the mark photo, not on the whole vase. A photo of the whole vase matches on shape and pattern, which is useful, but it also matches every similar vase ever sold. The mark photo matches on the mark itself, which is the thing that names the maker. Run both if you like, but read the mark search first.

When the results come back, look for three kinds of page. First, the reference pages: collector guides, museum collection pages, and maker’s-mark databases that describe the mark and give its date range. Second, the oldest results, which often lead to the collector forums and dating guides where the mark was first discussed. Third, the listings, which show what the same mark looks like on other pieces and what sellers call it. Listings are the weakest evidence on their own, because sellers copy each other’s descriptions, mistakes included. Use them to confirm a shape or a pattern name, never as your only source for a date.

If you want a method that works for any object, not just pottery, the same reverse-search-first approach is explained in our guide to finding an item by its photo. The steps are the same. Only the thing you photograph changes.

Worked example: a Royal Doulton Bunnykins backstamp, searched live

Here is the method run for real, on a real mark, on 16 November 2026. The test photo is a photograph of a Royal Doulton Bunnykins tableware backstamp, from Wikimedia Commons, taken by Gmcbjames on 27 March 2015 and shared under a CC BY-SA 4.0 licence. The mark shows three bunnies above the word “Bunnykins”, with the Royal Doulton lion and crown. It is a pottery backstamp rather than a vase mark, but the method is identical, and the photo is a clean, well-lit, square-on shot of a real mark, which is exactly what this guide asks you to take.

First, TinEye, by direct file upload. TinEye reported 184 results, having searched 86.7 billion images, and said the image was first indexed on 24 November 2009. Sorted oldest first, the top results were an eBay reviews guide called “Dating Royal Doulton Bunnykins Tableware” from 24 November 2009, an eBay listing for a Bunnykins cup, saucer and plate trio from 27 November 2009, and a Flickr photo from 22 December 2009. The very first result was a sponsored Alamy stock photo, which is an advert, not a match, and it is worth knowing that TinEye puts sponsored results first. The useful signal was the 2009 dating guide. It is the kind of page that actually explains a mark.

Then Google Lens, also by direct file upload. Lens does not state a total number of matches, so no total is claimed here. The visual matches tab listed 60 entries in the loaded view, mostly Etsy and eBay listings for Bunnykins plates and jugs. The exact matches tab listed 400 entries in the loaded view, led by the Wikipedia pages for Barbara Bailey, the Bunnykins artist, and for Royal Doulton Bunnykins itself. The Wikimedia Commons source file appeared as the 73rd entry in that list. Lens also showed its own AI Overview on the results page, identifying the image as a vintage Royal Doulton Bunnykins backstamp with the “Tug of War” rabbit illustration and the 1936 Royal Doulton Tableware Ltd. copyright mark.

What did the search actually prove? It proved the mark is Royal Doulton Bunnykins, it pointed to the right dating guide, and it confirmed the design is the “Tug of War” illustration. What it did not prove is the exact year. The bunnies-above-the-word version of this backstamp was used from 1937 to 1953, according to the collector guide antique-hq.com, but the photo shows no date number, so no precise year can be claimed from it. That is an honest limit, and it is the same limit you will hit with most marks. A reverse search names the maker and narrows the range. It rarely gives you a single year.

EngineWhat it reportedMost useful result
TinEye184 results, 86.7 billion images searched, first indexed 24 November 2009eBay reviews dating guide, 24 November 2009
Google LensNo total stated; 60 visual matches and 400 exact matches listed in the loaded viewsWikipedia pages for Barbara Bailey and Royal Doulton Bunnykins
Site tool (imagesearchtechniques.co.uk)No independent count; it opens the engines in new tabsSame Lens results as the direct search

One more honest note. The site’s own reverse image search tool was also tried with the same photo. It accepted the upload, but it opened the engines in new tabs rather than returning its own results, so it supplied no independent count. That is worth knowing before you rely on any single tool. Run the search on two engines yourself, and compare what each one finds.

What do the country words on a mark tell you?

Answer capsule: The country wording on a mark is a date range in plain sight. “NIPPON” means 1891 to 1921, “Occupied Japan” means 1947 to 1952, and “England” after 1891 is a starting point, not a finish line.

Country-of-origin wording was forced on pottery makers by trade law, and the laws changed on known dates. That is what makes the wording datable. The key law is the McKinley Tariff Act of 1891, which required goods imported into the United States to carry their country of origin. From 1891, Japanese pieces bound for America were marked “NIPPON”, the Japanese name for Japan, and English pieces were marked “England”. In 1921 the United States required the English name, so “NIPPON” became “Japan” and “Made in Japan” took over. A piece marked “NIPPON” was therefore made between 1891 and 1921. That is a solid range, and it is one of the most useful dates in pottery collecting.

The other country wordings work the same way, but each one has a trap. “Occupied Japan” was used from 1947, when the Allied occupation authorities ordered it, until the occupation ended on 28 April 1952. The marking starts in 1947, not 1945, which is the mistake most guides make. “West Germany” runs from the founding of West Germany in 1949 to reunification in 1990, but the wording “Made in West Germany” only became common after a court ruling in 1973, so a piece marked simply “Germany” from the 1950s is not automatically suspicious. “Czechoslovakia” covers 1918 to 1992, but marks from 1938 to 1945 read in German, and the wording overlapped into the early 1990s as old stock was used up. Treat each range as a guide, not a stamp of certainty.

“Made in England” needs the most care. It is often quoted as meaning after 1921, but that is only a rough guide. Mintons used it from about 1902, Wedgwood from after 1908, and Royal Crown Derby from about 1921. Many firms kept plain “England” long after 1921. If a guide tells you “Made in England” proves a piece is post-1921, it is overstating the case. Use the wording as one clue among several, and let the factory mark itself do the heavy lifting.

Wording on the markDate rangeWhat to watch for
NIPPON1891 to 1921McKinley Tariff 1891; “Japan” required after 1921
EnglandAfter 1891Starting point only; many firms kept it for decades
Made in EnglandRough guide, varies by makerMintons from about 1902, Wedgwood after 1908, Derby about 1921
Occupied Japan1947 to 1952Starts 1947, not 1945; occupation ended 28 April 1952
West Germany1949 to 1990“Made in West Germany” common only after a 1973 ruling
Czechoslovakia1918 to 1992German wording 1938 to 1945; wording overlapped into the early 1990s

For Japanese porcelain specifically, the Gotheborg Japanese porcelain marks pages are the reference most collectors use, and they are the source for the NIPPON dates above.

How do you check a famous maker’s mark?

Answer capsule: Check the mark against a database, but check the database too. The top-ranking guide on this topic prints two mark descriptions that are wrong, and copying them will misdate your piece.

Once you know the maker, the next step is the mark itself. Factories changed their marks over time, and the differences are often small: a crown added here, a word dropped there, a date code that moved from one side to the other. A maker’s-mark database lets you match your mark to a dated version. The best free ones are the specialist collector sites, and the Victoria and Albert Museum’s ceramics collection is a good place to see genuine pieces with their marks described properly.

But databases and guides can be wrong, and the current top-ranking guide on this topic is a case in point. Its mark table describes a Royal Doulton mark as a “crowned N” dated 1902 to 1922. There is no “crowned N” Doulton mark. The real mark is the lion, crown, and roundel device, with “Royal Doulton” and “England”, introduced in 1901 and in general use from 1902 to 1922. The “N” is a misreading of the four interlocking “D” letters in the device. The date range is right and the description is wrong, which is exactly the kind of error that sends a collector down the wrong path.

The same guide describes a Royal Worcester mark as “interlocking L over R” dated 1862 to 1875. That is wrong too. The Worcester mark of that period is a crown over a circle containing “51”, introduced in 1862. The dating ran on codes, not on the shape of the mark: number codes from 1862 to 1867, then letter codes from 1867 to 1877. “Interlocking” belongs to Doulton’s device, not Worcester’s. If you are matching a Worcester mark, look for the crown and the 51, and then read the code beside it.

Meissen needs a similar correction. The crossed swords mark is often dated to 1720, and 1720 is the year the blue underglaze colour was invented. The swords themselves were proposed in November 1722, the first marks appear around 1725, and the mark only came into general use in the 1770s. Say “1720s” rather than “1720”, and treat any piece whose mark looks too crisp and too blue for its claimed age with suspicion.

MakerMark to look forDate range
MeissenCrossed swords in underglaze blueFirst marks around 1725; general use from the 1770s
Royal DoultonLion, crown, and roundel with “Royal Doulton” and “England”Introduced 1901; general use 1902 to 1922
Royal WorcesterCrown over a circle containing “51”, plus a date code1862 onwards; number codes 1862 to 1867, letter codes 1867 to 1877
Any British makerDiamond-shaped registry mark1842 to 1883; it dates the design registration, not the making

One more mark is worth knowing, because it turns up on a lot of British pottery and it is often misread. The diamond-shaped registry mark, used from 1842 to 1883, records the date a design was registered, not the date the piece was made. The first version ran from 1842 to 1867 and the second from 1868 to 1883, and ceramics fall under Class IV in the registry. A piece with a diamond mark from 1850 could have been made years later from the same registered design. Use it as a “not before” date, never as the year of manufacture.

If your piece is china with a pattern rather than a maker’s mark, the job is different, and our guide to identifying a china pattern from a photo covers that method, including the Replacements database. This article stays with marks. Do not mix the two workflows, or you will search for a pattern when you should be reading a stamp.

How do you spot a fake or reproduction mark?

Answer capsule: A mark alone never proves a piece is genuine. Check the mark against the clay, the glaze, the weight, and the style, and treat any single perfect-looking mark on a suspicious piece as a warning, not a proof.

Fake marks fall into three types, and it helps to know which one you are looking at. A marriage mark is a genuine old mark on a piece it does not belong to, often a real base joined to a different body. A stamped copy is a mark copied onto a new piece, usually too crisp, too even, or in the wrong colour for its claimed age. An altered mark is a real mark that has been changed, a date code scratched out, a word added, or a crown painted over a plain stamp. All three are common, and all three are beaten the same way: by checking the mark against everything else about the piece.

Start with the clay body. Hold the piece up to a strong light. Fine bone china is translucent at the rim. Earthenware is not. A piece claimed to be 19th-century porcelain that is opaque and heavy is probably a later copy in a different body. Then look at the glaze. Old glazes have wear: tiny scratches, a softened edge where hands have held the piece for a century, and a fine network of crazing on some bodies. A piece claimed to be a hundred years old with a glaze as perfect as the day it was made deserves a second look, though perfect survival is possible, so it is a warning, not a verdict.

Reign marks deserve a special warning. Chinese reign marks, the six-character marks naming an emperor’s reign, were reproduced on later pieces so often that the Gotheborg marks site warns most of them are not from the period they claim. A reign mark that says “Qianlong” on a piece that looks 20th century is almost certainly a later copy. Never take a reign mark at face value.

Overmarking is another trap. Some European factories in the late 19th and early 20th centuries bought in blank pieces from other makers and added their own mark on top, sometimes over an earlier mark. Guides quote 1880 to 1930 as the main period for this, but that range comes from secondary sources and no primary source pins it down, so treat it as a guide range rather than a hard rule. If you can see a ghost of another mark under yours, you are probably looking at an overmark, and the piece was decorated by the second factory, not made by it.

Warning signWhat it may meanWhat to do
Mark sits on top of the glaze and flakesMark added after firingReject the mark; check the clay and shape instead
Mark too crisp and even for its claimed ageStamped copy on a new pieceCompare with dated examples in a database
Ghost of another mark under yoursOvermark; decorated, not made, by the second factoryIdentify both marks and date each one
Reign mark on a piece that looks modernLater reproductionDo not trust the reign mark; date by body and glaze
Clay body wrong for the claimed makerMarriage mark or copyCheck translucency, weight, and glaze wear
Country wording contradicts the mark dateOne of the two is wrongTrust the factory mark over the wording, and verify both

The same “mark alone never proves it” rule applies across the whole identification family. A watch dial can be faked, a coin can be copied, and a flag can be a modern reprint. Our guide to identifying a watch from a photo and our guide to identifying coins, stamps, and collectibles both use the same principle: the mark is the start of the check, not the end of it.

When should you ask a specialist?

Answer capsule: Ask a specialist when the piece looks old, valuable, or unusual, or when your own checks disagree with each other. A collector forum or an online appraiser can settle what a search cannot.

Most vases are identified in an afternoon with the method above. Some are not. If the mark matches nothing in any database, if the country wording contradicts the factory mark, or if the piece looks genuinely old and well made, that is the point to ask someone who handles pieces like yours every day.

Online antique appraisers will look at your photos and give an opinion, and specialist collector groups are often better still. Facebook groups for art glass and ceramic identification, and the long-running collector forums, are full of people who know one factory inside out. Post the same three photos you took at the start, full profile, rim, and base, and include the exact wording of the mark as you read it, including the parts you could not read. The people who can help you are the ones who need the mark photo, not a description of it.

Do not ask a specialist to value a piece from a single blurry photo, and do not treat any online opinion as a formal valuation. A proper valuation needs the piece in hand, and an appraiser who has only seen photos will say so. What a forum can give you, and give well, is an identification: the maker, the pattern, and the date range. That is usually the answer you actually wanted.

And if the piece turns out to be something else entirely, a flag, a painting, a piece of glass, the same photo-first method still works. Our guide to identifying a flag from a photo uses the same three-photo approach on a different kind of object, and it is a good reminder that the method matters more than the object.

One last point, and it is the one this whole guide comes back to. A reverse image search is a tool, not a verdict. It finds the pages that show the same mark, and it points you to the guides that explain it. The identification is yours. Read the mark, check the wording, compare the clay, and only then decide what you have. That is how a vase stops being a mystery and starts being a story you can tell.

Can I identify a vase from a photo alone?

Yes, in most cases, if the photo shows the mark on the base clearly. Photograph the full vase, a close-up of the rim, and a square-on shot of the mark, then reverse-search the mark photo with Google Lens and TinEye. The mark usually names the maker, and the country wording gives a date range.

What does NIPPON mean on a vase?

NIPPON is the Japanese name for Japan, and the word was used on pottery imported into the United States between 1891 and 1921, after the McKinley Tariff Act required a country of origin. In 1921 the United States required the English name, so the wording changed to Japan. A NIPPON mark therefore dates a piece to 1891 to 1921.

What is the difference between a backstamp and a maker’s mark?

They are the same thing in most cases. A backstamp is the maker’s mark printed, stamped, or painted on the underside of a piece of pottery or porcelain. It usually names the maker and often adds a pattern name, a country of origin, and sometimes a date code. Collectors use the two terms interchangeably.

Can a maker’s mark be faked?

Yes. Fake marks come in three types: marriage marks, where a genuine old mark sits on a piece it does not belong to; stamped copies, where a mark is copied onto a new piece; and altered marks. Check the mark against the clay body, glaze, weight, and style, because a mark alone never proves a piece is genuine.

Why does Google Lens find shopping listings instead of the maker?

Lens matches on shape and pattern as well as on the mark, so a photo of a whole vase returns listings for similar vases. Search on the mark photo alone, and read the reference pages and the oldest results first. TinEye sorts results by the date first seen online, which often surfaces the collector dating guide behind the listings.

What should I do if my vase has no mark at all?

Photograph the shape, the glaze, the rim, and the foot, and reverse-search those photos. Some makers never marked their pieces, and some marks wore away. Compare the shape and glaze with museum collection pages and maker databases, and ask a specialist collector group if the piece looks old or unusual. An unmarked piece can be identified, but it takes longer.

Ali Butt is the lead writer and SEO specialist at Image Search Techniques, where he covers reverse image search, visual search, and online image verification. With over four years of experience in SEO and content, he writes practical, hands-on guides that help readers trace a photo to its source, identify people, products, plants and brands from a picture, protect their own images online, and spot catfish, fakes and AI-generated images across Google, Yandex, Bing, TinEye and more.

Leave A Reply