Australian Passport Photo Requirements: Size, Rules

0

๐Ÿ”Ž Reverse Image Search

Image search techniques made simple: upload a photo or paste a URL and search 6 engines at once. 100% free, nothing stored.

๐Ÿ”’ Your image is never stored on our servers longer than 24 hours and is never shared.

Short answer: An Australian passport photo is 35 to 40 mm wide and 45 to 50 mm high, with your head 32 to 36 mm from chin to crown. You need two identical colour prints, taken within the last 6 months, on a plain white or light grey background. No glasses, no smile, no retouching.

An Australian passport photo has one job: to let biometric technology match your face at the border. The Australian Passport Office checks it against a fixed set of numbers, and a photo that misses any of them can hold up your application. This guide gives you every number, taken from the Passport Office pages themselves, and then checks one real photo against all of them so you can see how the rules work in practice. Nothing here comes from a photo-tool seller. Where the Passport Office gives no figure, this guide says so plainly instead of borrowing one from a shop.

What is a biometric photo? A biometric photo is a plain, front-facing portrait taken to a fixed size so that facial-recognition software can measure the distances between your features. That is why the rules are so strict about size, background and expression: the software needs a clean, repeatable image, not a flattering one.

What are the Australian passport photo requirements?

The Australian Passport Office publishes one photo page, and it sets every figure in this guide. The rules fall into four groups: size, face, background and clothing, and the printed photo itself. Get all four right and the photo passes. Miss one and the Passport Office can ask for a new photo when you lodge your application, or while it is being assessed. That is their wording, and it means a bad photo costs you time either way.

One thing to settle first: an Australian passport photo is not the same as a US passport photo or a UK passport photo, even though all three are small portraits on a plain background. The Australian size is a range, 35 to 40 mm wide, and the head height is its own figure, 32 to 36 mm. Do not reuse a photo cut for another country without checking it against the Australian numbers. Ireland is a good example of how different the numbers are: our guide to Irish passport photo requirements works through the DFA sizes for online and paper applications, the glasses rule and the witness trap. Our guide to fixing a rejected passport photo covers the UK rules if that is the document you need. The rest of this guide stays on Australia.

Answer capsule: The Australian passport photo rules come from the Australian Passport Office, not from photo shops. Size, face, background and print quality each have a fixed figure, and every figure is listed in the table below. New Zealand publishes its own fixed figures too, and they differ: our guide to the New Zealand passport photo requirements covers the DIA 3:4 digital file and the paper forms that ask for a light background that is not white.

What size does an Australian passport photo have to be?

Size is where most rejections start, because there are two sizes to get right at once: the size of the print and the size of the head inside it. A photo that is right for printing can still fail because the head is too small, and a photo with the right head can still fail because the print is the wrong shape. Here is the full spec table, with the Passport Office source for each figure.

RuleThe figureAustralian Passport Office source
Printed photo size35 to 40 mm wide, 45 to 50 mm highPassport photos page
Head size, chin to crown32 to 36 mm, including hairPassport photos page
Number of photosTwo identical, good-quality colour printsPassport photos page
Photo ageLess than 6 months oldPassport photos page
Print methodDye sublimation, not from an inkjet printerPassport photos page
Print paperHeavy-weight, glossy paper, minimum 200 gsmPassport photos page
BackgroundPlain white or light grey, contrasting with your facePassport photos page
ExpressionNeutral, mouth closed, both eyes open (over 3 years old)Passport photos page
GlassesNot allowed, unless you cannot remove them for medical reasonsPassport photos page
Digital photo dimensionsNone published anywhere official: no pixel size, file format or file-size limit on the Passport Office, adult passport, news or embassy pagesChecked 19 November 2026

Two traps sit inside this table. The first is the size range. Australia accepts a range, not one fixed size, so a standard 35 by 45 mm photo works as long as the head inside it measures 32 to 36 mm. The head is the part that matters. On a 45 mm high print the head must fill about 71 to 80 percent of the height. On a 50 mm high print it must fill about 64 to 72 percent. A head that looks right on a taller print can be too small on a shorter one, so measure the head, not just the print.

The second trap is the print itself. The Passport Office wants dye sublimation prints on heavy glossy paper of at least 200 gsm. A home inkjet print fails that rule even if the image is perfect, because inkjet ink sits on the paper differently and the biometric scan reads it less reliably. Get the photos from a professional provider: a post office, a professional photographer, a camera store, or a pharmacy that offers passport photos. The Passport Office lists all of these as providers, and it warns against online passport photo services and mobile apps, saying they may put you in danger of identity fraud.

If you take the photo at home, ask someone else to take it rather than using a selfie, hold the camera horizontally, and stand at least 1.2 metres from the person in the photo. That distance is the minimum in the Passport Office’s own camera guidance, and a camera held too close distorts the face. The rest of the rules still apply: a plain white or light grey background, even light, no shadows and no retouching.

One more size note, for Australians applying from the United States. The AI summary on this topic repeats a US-application point worth knowing: standard US pharmacy and retail passport photo services are generally not acceptable for an Australian passport, because they cut to the US 2 by 2 inch size. Use a qualified photographer who can follow the Australian specification, or follow the embassy capture guidelines. A 2 by 2 inch print is only accepted if the image inside it meets the Australian size rules and the print is left untrimmed.

Answer capsule: Print 35 to 40 mm wide by 45 to 50 mm high, keep the head 32 to 36 mm from chin to crown, and print it by dye sublimation on glossy paper of at least 200 gsm.

How should your face look in the photo?

Face the camera directly, with your face centred and looking straight at the lens. Anyone over 3 years old must face the camera straight on, with eyes open and a neutral expression. That means mouth closed, no smile, no teeth showing, and both eyes clearly visible. For children under 3, the mouth may be open, but no one else can be visible in the photo, no parent holding the child, no hand, no toy.

The Passport Office lists smiling as an unacceptable example on its photo page, and so is a subtle expression. A relaxed mouth reads as neutral. A half smile does not. If you are unsure, take several frames and pick the most neutral one. The same page lists looking away from the camera, a head tilted up or down, and a head turned to the side as unacceptable, so keep your head level and your gaze on the lens.

Hair is part of the face check. It must not cover your eyes, and it must not hide the edges of your face. The rule is written so that both edges of your face and the corners of your eyes stay visible. Long hair pulled back is fine. Hair across one eye is not. A fringe that touches the eyebrows is usually fine as long as the eyes and the face edges stay clear, but if in doubt, pin it back.

Your face must be clear, in focus, with no marks and no red-eye. The lighting must be even, with the right brightness and contrast to show your natural skin tone. No shadows on the face, no shadow under the chin, and no shadow behind the head. Stand far enough from the wall that your head casts no shadow on it, and use even light from the front. A photo taken too close to the camera distorts the face, and the Passport Office lists that distortion as unacceptable, so step back and zoom in rather than leaning into the lens.

Answer capsule: Face the camera straight on, neutral expression with mouth closed and both eyes open, hair off the face, even light and no shadows anywhere in the frame.

Can you wear glasses in an Australian passport photo?

No. You must not wear glasses in an Australian passport photo unless you cannot remove them for medical reasons. Vision impairment alone is not an acceptable reason. That is the Passport Office rule in full, and it is stricter than many people expect: even if you wear glasses every day, take them off for the photo.

If you cannot remove your glasses for medical reasons, two conditions apply. The frames must not cover your eyes, and there must be no reflection from the lenses. That is a hard standard to meet, and most applicants find the photo easier without glasses. Sunglasses are never accepted, and neither are tinted lenses. The Passport Office lists a photo with glasses on as an unacceptable example.

If you cannot meet a photo rule because of a medical condition, the Passport Office asks for a medical certificate, or a completed B-11 form that explains why. Do not guess at this step. The certificate or the form is part of the application, and the photo alone will not carry the exemption.

Answer capsule: No glasses in an Australian passport photo, even if you wear them daily. The only exception is a medical reason you cannot remove them, backed by a certificate or a B-11 form.

What background, clothes and head coverings are allowed?

The background must be plain white or light grey, with nothing on it: no pattern, no texture, no crease, no shadow. It must contrast with your face, so a very pale person against a white wall can be a problem, and light grey is the safer choice there. A patterned curtain, a bookshelf, a doorway or a wall with marks behind you does not pass. The Passport Office lists a background that is not plain, and one that has been edited, as unacceptable.

Wear the clothes you normally wear every day. The Passport Office page does not set a clothing rule beyond that, but the photo must show your head and shoulders against the plain background, and nothing in the frame should distract from your face. A hat on the head is listed as unacceptable. Keep it simple: a plain top, no high collar hiding the chin, no bright pattern pulling the eye away from the face.

Head coverings follow a clear rule. If you usually cover your head for religious reasons, you can wear the covering in your passport photo. It must be plain, without patterns, even small patterns. You must wear it in a way that shows your entire face, from the bottom of your chin to the top of your forehead, with the edges of your face on either side visible as well. A patterned head covering is listed as unacceptable, and so is a face partly covered. A covering worn for fashion, rather than for religious reasons you follow every day, is not accepted.

Jewellery and piercings are allowed only if they stay out of the way. If you usually wear jewellery or have a piercing, make sure it does not cover any part of your face, especially around your eyes, mouth and nose. There must also be no reflection from any rings or studs. Small studs that sit flat and catch no light are usually fine. Anything that glints, dangles across the face, or hides part of it is not.

Hearing aids are allowed. If you usually wear a hearing aid, you can wear it in your passport photo, and that applies to adults, children and infants. AirPods and other wireless earbuds are not hearing aids, and they must be removed for the photo. The Passport Office lists wireless earbuds as an unacceptable example.

Answer capsule: Plain white or light grey background, everyday clothes, plain religious head coverings only with the full face visible, jewellery that neither covers nor reflects, hearing aids in and earbuds out.

How do you lodge the photos with your application?

You lodge two printed photos with the application. There is no digital photo upload for an adult Australian passport application. You can fill the form in online, but you must print it and lodge it, with the photos, in person at a participating post office. The Passport Office publishes no digital dimensions, pixel size, file format or file-size limit for the photo anywhere on its pages, so do not trust a tool-seller page that quotes such figures as official.

New and renewal applications use the same photos: two identical prints that meet the same guidelines. The difference is who signs what. A renewal needs no guarantor or referee and no identity documents. You write your own full name on the back of one photo with a black pen. A new application on a paper form needs a guarantor, who signs section 11 of the form and the back of one photo, and writes “This is a true photo of [your full name]” in black pen. A new application on the online form needs a referee instead, who signs nothing but must be willing to confirm your identity if the Passport Office contacts them. A guarantor or referee must be an adult Australian citizen who has known you for more than one year, and must not be related to you, living at your address, a Passport Officer or an Australia Post employee.

Allow at least six weeks from lodging for the passport to arrive. A photo that does not meet the guidelines can delay the application, so check the size and the head height before you lodge, not after.

Answer capsule: Lodge two printed photos in person at a participating post office. There is no digital upload. Renewals need no guarantor; a new paper application needs one to sign the back of one photo.

Worked example: one real photo checked against every rule

Rules are easier to trust when you see them applied. For this article we produced a passport-style portrait in November 2026 and checked it against every rule in the Australian passport photo requirements. The file is a WebP image, 1600 by 1600 pixels, 312,186 bytes. The subject faces the camera directly, wears no glasses and no head covering, and stands against a plain light grey background in a plain dark top. Here is how it scores.

RuleWhat this photo showsResult
Printed size 35 to 40 by 45 to 50 mmThe file is square, 1600 by 1600 pixels. Printed as it stands it is the wrong shape: the Australian print is a portrait rectangle, not a squareFail
Head size 32 to 36 mmThe head measures about 61 percent of the image height, crown to chin. On a 45 mm print that is about 27 mm, and on a 50 mm print about 31 mm, both below the 32 mm minimumFail
Two identical prints, less than 6 months oldProduced for this article in November 2026, so the age rule passes; two identical prints would be made from this one filePass
Background plain white or light greyPlain light grey background, no pattern, no shadow on the face or wall, and it contrasts with the facePass
Neutral expression, both eyes openNeutral expression, mouth closed, both eyes open, facing the camera straight onPass
No glassesNo glasses wornPass
Face centred, head levelFace centred in the frame, head level, looking straight at the cameraPass
Hair off the faceHair frames the face but does not cover the eyes, and both edges of the face stay visiblePass
Jewellery: no cover, no reflectionSmall gold stud earrings only. They do not cover any part of the face and catch no visible reflectionPass
No retouching, sharp and in focusSharp focus, natural skin tone with moles and freckles visible, no smoothing or filteringPass

The verdict is 8 passes and 2 fails, and the two fails share one fix. Crop the photo to a portrait rectangle of 35 to 40 mm wide by 45 to 50 mm high, and crop it tighter so the head fills 32 to 36 mm on the print. On a 45 mm high print the head must fill about 71 to 80 percent of the height. Cropping the square file to that shape and that head size fixes both rows at once, and the background, expression and lighting all survive the crop unchanged. Then print the cropped file by dye sublimation on glossy paper of at least 200 gsm, and make two identical copies.

That is the pattern to copy. Check the print shape and the head size first, then the face, then the background. Fix size problems with a crop, not with a new photo, and only retake the photo when the face or the background fails. If your photo is rejected, our guide to fixing a rejected passport photo walks through the same kind of rule-by-rule check, and the habit transfers directly to Australian photos.

The Australian passport photo requirements are only one set. Canada and the Schengen area each publish their own photo spec, and the numbers differ, so do not reuse an Australian passport photo for another application without checking. Our guides to Canada visa photo requirements and Schengen visa photo requirements give the same table treatment for those two. The full official figures are on the Australian Passport Office passport photos page, and the US-application notes are on the embassy passport photos page. Germany is the one to compare against, because it now splits the route by place: see German passport photo requirements, which covers the 35 by 45 mm spec, the 27 to 40 mm face tolerance, and the printed versus digital split.

FAQs

What size is an Australian passport photo?

An Australian passport photo is 35 to 40 mm wide and 45 to 50 mm high, with the head 32 to 36 mm from chin to crown. You need two identical colour prints, taken within the last 6 months. A standard 35 by 45 mm photo works as long as the head inside it measures 32 to 36 mm.

Can I wear glasses in an Australian passport photo?

No. Glasses are not allowed in an Australian passport photo unless you cannot remove them for medical reasons, and poor eyesight alone is not a medical reason. If you have a medical reason, the frames must not cover your eyes and the lenses must not reflect light. You will also need a medical certificate or a completed B-11 form.

Can I take my Australian passport photo at home?

You can, but the Passport Office recommends a professional provider such as a post office, a photographer or a camera store. A home photo must meet every rule: the size and head height, a plain white or light grey background, even light, no shadows and no retouching. Online photo services and apps are not recommended, because of identity fraud risk.

Can I smile in an Australian passport photo?

No. Anyone over 3 years old must face the camera straight on with a neutral expression, mouth closed and both eyes open. Smiling is listed as unacceptable on the Passport Office photo page, and so is a subtle expression. Take several frames and pick the most neutral one.

What should I do if my Australian passport photo is rejected?

Take a new photo that meets the spec, or ask the Passport Office what failed. Check the print size and the head size first, since most rejections are a wrong size, a head too small, or a home inkjet print. The Passport Office can ask for a new photo when you lodge the application or while it is being assessed.

Is an Australian passport photo the same as a US passport photo?

No. An Australian passport photo is 35 to 40 mm wide by 45 to 50 mm high, with a head of 32 to 36 mm. A US passport photo is 2 by 2 inches, with a head of 1 to 1 3/8 inches. Do not reuse a photo cut for one country on the other.

Ali Butt is the lead writer and SEO specialist at Image Search Techniques, where he covers reverse image search, visual search, and online image verification. With over four years of experience in SEO and content, he writes practical, hands-on guides that help readers trace a photo to its source, identify people, products, plants and brands from a picture, protect their own images online, and spot catfish, fakes and AI-generated images across Google, Yandex, Bing, TinEye and more.

Leave A Reply