Photograph the battery in good light, with the printed code and a coin or ruler beside it for scale. Read the code on the label first: the letters give the chemistry and the numbers give the size. Match the shape, the code and the device it came from, and you will know the exact type in under a minute.
This guide shows you how to identify a battery type from a photo, step by step, with a real worked example. You will learn what the printed codes mean, how to read shape and size when the label is worn, and how a reverse image search can name a battery for you. It covers household and device batteries only: the loose AA in a remote, the coin cell in a key fob, the 9V in a smoke alarm. Car batteries and electric vehicle packs are a different job and are not covered here.
What can a photo of a battery actually tell you?
A good photo tells you a lot. It shows the shape, the size next to something you know, the printed code, the terminals, and sometimes the brand. Put together, those four clues are usually enough to name the battery. What a photo cannot show is how much charge is left, or whether a rechargeable cell still holds a charge. A photo names the type. It does not test the battery.
Start by getting the words right, because size and chemistry are two different things and people mix them up. AA is a size. Alkaline, lithium and nickel metal hydride are chemistries, and all three come in AA size. So “AA” alone is not a full answer. You need the size and the chemistry, and the voltage ties the two together.
Battery type means three things at once: the physical size (AA, AAA, C, D, 9V, CR2032), the chemistry (alkaline, lithium, silver oxide, rechargeable), and the voltage (1.5V, 3V, 9V, 12V). A replacement has to match all three, not just the size.
The same rule applies to the photo itself. A close-up of a bare silver cylinder could be an AA, a C or a D cell. The same cylinder next to a coin, with its label readable, is a different story. Scale and print turn a guess into an identification.
Answer capsule: a photo can identify a battery type when it shows shape, scale, the printed code and the terminals, but it cannot show charge or condition.
How do you identify a battery type from a photo?
Work through the clues in order. Shape narrows it down fast, the code pins it down, and the device it came from confirms it. Skip a step and you end up buying the wrong cell.
- Photograph it properly. Lay the battery flat in daylight or under a bright lamp. Shoot straight down at the label, not at an angle. Put a coin or a ruler beside it so the size is obvious. If the label wraps around the cell, take one photo of each side.
- Name the shape. Is it a cylinder, a flat coin, a rectangular block with snap terminals, or a flat pack with wires? That one answer cuts the list to a handful of types.
- Read the printed code. Look for letters and numbers on the label, such as LR6, CR2032 or 6LR61. The letters give the chemistry and the numbers give the size. This is the single most useful clue in the photo.
- Read the voltage. Most household cells print it plainly: 1.5V, 3V, 9V or 12V. If the code and the voltage agree, you are nearly there.
- Look at the terminals. A 9V has two snap terminals on one end. A coin cell has a flat top and a flat bottom. A cylinder has a small raised nub at the positive end and a flat negative end. Terminals confirm what the shape suggested.
- Check the device it came from. Most battery compartments have the size stamped inside the tray, and the manual names the type. If the label is unreadable, the tray is your backup.
The same routine works for other small household objects people photograph to name. The steps are identical when you identify a tool from a photo: shape first, then the markings, then the thing it belongs to.
Here is the routine as a table, so you can work through it with a photo open in front of you.
| Step | What to look for in the photo | What it tells you | Example |
|---|---|---|---|
| 1. Shape | Cylinder, coin, block or flat pack | Narrows the list to a few types | A coin shape means a button cell |
| 2. Printed code | Letters and numbers on the label | Chemistry and exact size | CR2032 is a 3V lithium coin cell |
| 3. Voltage | 1.5V, 3V, 9V or 12V printed on the cell | Confirms the code | LR6 and 1.5V agree on an AA |
| 4. Terminals | Snap terminals, flat faces, raised nub | Confirms the shape | Two snaps on one end means a 9V |
| 5. Scale | Coin or ruler beside the battery | Separates lookalikes | AA and C look alike without scale |
| 6. Device check | Size stamped in the battery tray | Confirms the replacement | A remote tray stamped AAA |
Answer capsule: shape first, code second, voltage and terminals to confirm, and the battery tray as the final check.
What do the letters and numbers printed on a battery mean?
The codes on household batteries follow the IEC system, and once you know the pattern you can read almost any cell. The first letter or letters name the chemistry, the letter R means round, and the numbers name the size. A few examples make the pattern clear.
| Printed code | Common name | What it means | Voltage |
|---|---|---|---|
| LR6 | AA | Alkaline round cell, size 6 | 1.5V |
| LR03 | AAA | Alkaline round cell, size 03 | 1.5V |
| LR14 | C | Alkaline round cell, size 14 | 1.5V |
| LR20 | D | Alkaline round cell, size 20 | 1.5V |
| 6LR61 | 9V | Six alkaline cells in one block | 9V |
| LR8D425 | AAAA | Alkaline round cell, slim size | 1.5V |
| 8LR932 | A23 | Eight alkaline cells, short cylinder | 12V |
| 3LR12 | 4.5V flat | Three alkaline cells in a flat pack | 4.5V |
| CR2032 | Coin cell | Lithium round cell, 20mm wide, 3.2mm thick | 3V |
| LR44 | Button cell | Alkaline round cell, 11.6mm wide | 1.5V |
| SR44 | Button cell | Silver oxide round cell, same size as LR44 | 1.55V |
Three letter pairs do most of the work. CR means lithium, and a CR cell is almost always 3V. LR means alkaline, and an LR cell is almost always 1.5V. SR means silver oxide, and an SR cell is 1.55V. The number after the letters is the size. In CR2032, 20 is the diameter in millimetres and 32 is the thickness in tenths of a millimetre, so 3.2mm thick. The same pattern holds for CR2025 (2.5mm thick) and CR2016 (1.6mm thick), which is why those three are so easy to mix up. They share a diameter and differ only in thickness.
Watch out for the size trap. LR44 and SR44 are the same physical size but different chemistries, and a silver oxide cell holds its voltage steadier as it drains, which is why watches and calculators often specify SR. An alkaline LR44 will fit and work, but it may not last as long in a device built for silver oxide. The label code, not the size, decides which one you need.
Some batteries carry no IEC code at all. Rechargeable lithium cells such as the 18650 are named by their dimensions instead: 18mm across and 65mm long, running at 3.7V. Phone and laptop packs carry a part number rather than a size code, and for those the part number is the thing to search for. Energizer’s battery comparison chart lists the common sizes side by side with their chemistry, shelf life and capacity, which is a handy cross-check when a label only gives a brand name and a size.
Never guess chemistry from colour alone. Brands change their label colours, and a copper-coloured top or a black sleeve says nothing about what is inside the cell. Read the letters. If the label is too worn to read, the next section covers what to do.
Answer capsule: the letters name the chemistry, the numbers name the size, and CR, LR and SR cover most household cells you will meet.
Can a reverse image search identify a battery from a photo?
Yes, and it works best when the photo is clear and the battery is a common type. A reverse search compares your photo with images already on the web, so it can name a battery that appears in guides, shop listings and encyclopaedia pages. It cannot read a worn label for you, and it cannot tell you what is inside a cell that looks like another. Use it to confirm the type, not as the only check.
To show what actually happens, I ran a real test on 20 November 2026. The test photo is a Wikimedia Commons comparison shot by a photographer credited as Lead holder, dated 3 June 2011 and shared under a CC BY-SA 3.0 licence. It lines up ten batteries with a ruler and a matchstick for scale, left to right: a 4.5V flat battery, a D cell, a C cell, an AA cell, an AAA cell, an AAAA cell, an A23, a 9V block, an LR44 button cell and a CR2032 coin cell. I searched that exact photo on Google Lens, TinEye and Yandex and wrote down what each one returned.
Google Lens did the best job. It named all ten battery types correctly, left to right, and described the image as a size comparison of common household batteries with a matchstick and a ruler for scale. It gave the code for each one, including 3LR12 for the 4.5V, LR20 for the D, LR6 for the AA, 8LR932 for the A23 and 6LR61 for the 9V, with the right voltage beside each. Its counts were 243 exact matches on the first exact matches page, 59 visual matches shown before a “See more” button, and 9 web results led by the Wikipedia “Primary battery” page and the Commons file page. One honest snag: Lens first failed to fetch the photo from its web address and reported an expired visual search. Pasting the same address into Lens’s own “Paste image link” box worked straight away, so if a search by address fails, try the paste route before giving up.
TinEye took a different approach. It found 78 results across the 86.8 billion images it has indexed, and said it first saw the photo on 27 February 2012. TinEye names nothing itself. All 78 results were copies of the same image on Wikipedia, Wikimedia and other sites, including the “List of battery sizes” page and the LR44 battery page. That makes TinEye useful for one specific job: finding where a battery photo has already been used, which tells you the pages that explain it.
Yandex was the weakest of the three in English. It recognised the image and tagged it in Russian as battery size and type, but it named none of the ten batteries in English. It listed 17 copies in other sizes and 40 similar images on the first screen, mostly battery size guides. If you only need to confirm that a photo shows batteries and find similar size guides, Yandex helps. If you need the type named, Lens is the better tool.
The lesson from the test is simple. A reverse search is strongest when the photo shows several batteries with a scale object, because the search engines have seen that exact comparison image many times. A single loose battery on a plain background is a harder test, and the engines may only return lookalikes. That is why the label code still matters more than any search result. Run the search, then check its answer against the code printed on your own battery. If they disagree, trust the code. Our step-by-step guide to reverse image search walks through the upload and paste-link routes on each engine, including what to do when a search by address fails. The same photo-first method sits at the heart of our guide to finding an item by its photo, which covers objects of all kinds, not just batteries.
Answer capsule: Lens named all ten batteries in the test photo, TinEye found where the image is used, and Yandex only tagged it in general terms, so use Lens first and always check its answer against the printed code.
What if the label is worn off or the battery has no markings?
A worn label is common on batteries that have rattled around in a drawer for years, and it is not the end of the identification. You still have shape, size and the device itself, and those three together are usually enough.
Start by measuring the cell. A ruler and five seconds separate the lookalikes that cause most mistakes. AA and C cells are both about 50mm long, but an AA is about 14.5mm across and a C is about 26mm across, so the width gives it away at once. AAA is shorter and slimmer than AA at about 44.5mm long and 10.5mm across. A D cell is the big one at about 61.5mm long and 34mm across. A 9V block is about 48.5mm tall with two snap terminals on top, which no cylinder has. A coin cell is measured across its face: a CR2032 is 20mm across, an LR44 is 11.6mm across, and that gap is easy to see with a ruler.
Then check the battery tray. Open the compartment the battery came from and look inside. Most makers stamp the size into the plastic, or print a small diagram showing which way round the cells go and what size they are. A remote that takes AAA cells will usually say so in the tray, and a smoke alarm will often print the type on a label inside the cover. Photograph the tray as well as the battery: if you search for the device, the tray photo is often what gets you the answer.
If the tray says nothing, search for the device instead of the battery. The model number is usually on a sticker on the back or inside the battery cover. Search that model number with the words “battery type” and the maker’s own page or manual will normally name it. A camera that takes a CR123A, a hearing aid that takes a size 13 zinc air cell, or a car key fob that takes a CR2025 all turn up this way, because the device is easier to name than a blank cell.
The same trick works for other small household parts that have lost their markings. When you identify a light bulb from a photo, the fitting and the shape do the same job the tray and the ruler do here: they narrow a blank object down to one answer.
Answer capsule: measure the cell, read the stamp inside the battery tray, and if both fail, search the device model number instead of the battery.
Which battery should you buy as a replacement?
Buy the same size, the same voltage and the right chemistry for the device. Size alone is not enough, and this is where most wrong purchases happen.
Start with the voltage. An alkaline AA gives 1.5V and a rechargeable NiMH AA gives 1.2V. Both fit the same slot, but a device that needs a full 1.5V, such as some cameras and blood pressure monitors, may warn of a low battery or refuse to work on the rechargeable. Check the manual. If it says alkaline only, or lithium only, follow it. Smoke alarms are the classic case: many makers specify a lithium 9V or a named alkaline, because a lithium cell holds its voltage longer and the alarm’s low-battery warning depends on it.
Then match the chemistry to the job. Alkaline cells suit remotes, clocks and toys, where the drain is low and steady. Lithium cells suit cameras, smoke alarms and outdoor gear, where the drain is high or the temperature drops. Rechargeable cells suit things you use every day, such as game controllers and torches, where you will charge them often enough for the lower voltage not to matter. Silver oxide suits watches and calculators, where a steady voltage matters more than anything else.
Coin cells deserve extra care because the lookalikes differ only in thickness. A CR2032 is 3.2mm thick, a CR2025 is 2.5mm and a CR2016 is 1.6mm. All three are 20mm across and all three will drop into the same holder, but a thinner cell can sit loose, lose contact and cut out when the device moves. If the old cell’s code is unreadable, measure the thickness with a ruler or compare it against a coin: a CR2032 is about twice as thick as a CR2016. Buy the exact code the device asks for, not the one that merely fits.
If the battery belongs to a gadget you cannot name, start from the device rather than the cell. Our guide to finding a spare part from a photo covers that route: photograph the device and its model number, and work outwards from there.
Answer capsule: match size, voltage and chemistry together, and for coin cells match the exact code, because a thinner cell that fits can still lose contact.
Is it safe to handle a loose battery?
For ordinary household batteries, yes, with a little care. The rules below cover the cells in this guide only. Car batteries and electric vehicle packs carry far more energy and need separate handling, so leave those to a garage or a dealer.
Never open, puncture, bend or try to charge a battery that is swollen, leaking, cracked or hot. A swollen cell has gas building up inside it, and a leaking cell has chemicals escaping that can irritate skin and damage anything they touch. Put it somewhere it cannot short against metal, keep it away from children and pets, and take it to a battery recycling point. Most UK supermarkets have a collection box by the door, and household recycling centres take them too. Do not put batteries in your household waste or recycling bin, because a damaged cell can start a fire in a bin lorry or a sorting plant.
Loose batteries in a drawer are a small fire risk of their own. The terminals of a 9V block can short against a coin, a key or another battery, and a shorted cell gets hot fast. Keep loose cells in their packaging, or put a strip of tape over the terminals of a 9V before you store it. Keep different types apart rather than tipping them into one jar.
Coin cells need a separate warning because they are small, shiny and easy for a young child to swallow. Keep them out of reach, keep spares in child-resistant packaging, and check that battery compartments on toys and remotes have a screw holding the cover shut. If a child swallows a coin cell, get medical help at once and do not wait for symptoms. The UK Office for Product Safety and Standards runs a button batteries safety campaign with the same advice: keep them away from children, buy products with secure compartments, and act fast if one is swallowed.
When a battery is finished, recycle it rather than binning it. The metals inside can be recovered, and keeping them out of landfill is the whole point of the collection boxes. That is the last step of identifying a battery: once you know what it is, you also know where it goes when it is done.
Answer capsule: handle ordinary cells with dry hands, tape the terminals of loose 9V blocks, never use a swollen or leaking cell, and keep coin cells away from young children.
FAQs
Can I identify a battery type from a photo alone?
Usually, yes, if the photo is clear. A straight-on shot in good light, with the printed code readable and a coin beside the battery for scale, is normally enough. If the label is worn off, measure the cell and check the size stamped inside the battery tray. The photo names the type, not the charge left.
What does CR2032 mean on a coin cell?
CR means a lithium cell, and the numbers give the size. The 20 is the diameter in millimetres and the 32 is the thickness in tenths of a millimetre, so 3.2mm thick. A CR2032 is a 3V lithium coin cell, 20mm across. A CR2025 is the same width but 2.5mm thick, and a CR2016 is 1.6mm thick.
Can I use a rechargeable battery instead of a normal one?
It depends on the device. A rechargeable NiMH AA gives 1.2V where an alkaline AA gives 1.5V, and some devices need the full 1.5V to work properly. Check the manual first. Rechargeables suit things you use daily, such as game controllers and torches. Smoke alarms and some cameras often need alkaline or lithium instead.
What should I do with a swollen or leaking battery?
Do not use it, open it, puncture it, bend it or try to charge it. Put it somewhere its terminals cannot touch metal, keep it away from children, and take it to a battery recycling point. Most UK supermarkets have a collection box, and household recycling centres take them too. Never put batteries in household waste or recycling bins.
Why does the same size battery come in different voltages?
Because size and chemistry are separate. An AA cell can be alkaline at 1.5V, lithium at 1.5V or rechargeable NiMH at 1.2V, and all three fit the same slot. Coin cells vary the same way: a CR2032 lithium cell is 3V while an LR44 alkaline cell of similar size is 1.5V. Always match the voltage as well as the size.
Can Google Lens tell me which battery to buy?
It can name the battery type, which is the first step, but it cannot choose the replacement for you. In our test Lens named all ten batteries in a comparison photo correctly. Take its answer, check it against the code on your own battery and the size in the device tray, then buy the code the device asks for.







