Australian ETA App Photo Problems: Fix Scan and Selfie Fails

0

๐Ÿ”Ž Reverse Image Search

Image search techniques made simple: upload a photo or paste a URL and search 6 engines at once. 100% free, nothing stored.

๐Ÿ”’ Your image is never stored on our servers longer than 24 hours and is never shared.

Australian ETA app photo problems usually come down to three capture steps, not your eligibility: the passport page scan, the NFC chip read, and the live selfie. Each step has its own failure message and its own fix, and the fixes are mostly about light, position and removing cases. Work through them in order and most failures clear in minutes. The UK proof-of-age card fails the same way: our CitizenCard photo rejected guide covers the PASS card rules and the 1280 by 720 minimum that catches passport-sized files.

Photo rules differ again for a paper passport application. The US visa form has its own upload rules too: our DS-160 photo upload failed guide covers the State Department file sizes and framing checks. If a US passport photo was rejected, our US passport photo rejected guide walks through the State Department 90-day fix-and-resubmit workflow.

An Electronic Travel Authority (ETA), subclass 601, is a digital permission to travel to Australia for short tourism or business visits, linked to your passport rather than printed in it. You apply only through the free AustralianETA app, published by the Department of Home Affairs. The app charges a service fee of AU$20, which is non-refundable, and there is no separate visa application charge. Home Affairs states that an ETA is valid for 12 months from the date of grant, or until your passport expires if that comes first, and that each stay can last up to 3 months, with multiple entries allowed. The App Store listing, checked in November 2026, says the app requires iOS 17.6 or later. Your phone also needs a camera, NFC switched on and location services switched on, plus an email address you can open and a payment method. If your phone cannot meet those needs, no camera trick will save the application, so check them before you start.

This guide covers capture problems only: the photo page scan, the chip read and the live selfie. It does not cover who qualifies for an ETA or how to answer the declaration questions. For those, use the official Home Affairs pages. Australia’s app is the close mirror of the UK system, and our guide to UK ETA app photo problems follows the same three-step pattern, so readers who have used both will find the fixes familiar.

What does the Australian ETA app ask you to do?

The app takes you through five steps, in this order: scan your passport, take a photo of yourself, answer the declaration questions, pay the AU$20 service fee, and submit. The photo trouble lives in the first two steps, and each of those steps breaks into smaller captures. Knowing which capture failed tells you which fix to use, so do not guess. The table below is the whole article in one place: find your step, read what the app shows when it fails, and try the fix in the order given.

StepWhat the app asksWhat you see when it failsWhat actually clears it
1. Passport page scanPhotograph the data page with the phone cameraThe frame stays red, or the details it reads back are wrongFlat surface, bright even light, no fingers on the page, no glare, whole page inside the frame
2. Passport chip readRead the chip with NFCNo response, or the read starts and then dropsNFC on, both cases off, phone flat on the right spot, slide slowly, then hold still
3. Live selfieTake a live photo of your face in the appThe oval stays red, or the app calls the photo unsuitablePlain light wall, face forward at eye level, no shadow or glare, glasses off where possible

Three practical points apply to all three steps. First, each person needs a separate application, including infants and children, and each person must be physically present, because the live photo is taken during their own application. Second, finish the application in one sitting. Home Affairs designed the app so that closing it deletes an application that has not been submitted, which means you start again from the beginning. Third, check every detail the app reads back against the physical passport, letter by letter, before you confirm it. A wrong digit confirmed in a hurry is far harder to fix than a failed scan.

Why does the passport data page scan fail?

The data page scan fails when the camera cannot read the page cleanly, and the fix is nearly always about the setup, not the phone. Home Affairs publishes a short video guide for this step, and its instructions are plain. Press the Scan passport button, open the passport to the data page, and lay the passport on a well-lit flat surface. Remove every obstruction from the data page, including your fingers, and reduce glare on the page from bright lights. Position the phone over the passport and align the data page with the frame on the screen. When the phone is in the correct position, the frame turns green and the passport details are captured automatically. If the frame never turns green, something in that list is still wrong, so change one thing at a time and try again.

Glare is the usual culprit. Passport pages are glossy, and a ceiling light or a window behind you throws a bright patch across the photo or the machine-readable zone at the bottom of the page. Move the passport, not the phone, so the light falls from the side. A table near a window in daylight works better than a lamp shining straight down. If the page has a plastic sleeve or a cover flap over it, take it off. Do not photograph a photocopy of the page, and do not photograph the page on a screen. The app wants the original passport, and a copy will not read reliably even if it looks sharp to you.

Fingers cause the second most common failure. The frame needs the whole page, including all four corners and both lines of the machine-readable zone, so a thumb holding the page open can block the very text the app needs. Lay the passport flat and let its own weight hold it open. If it keeps springing shut, rest a plain object on the edge of the cover, well away from the data page itself. Check the light on the photo as well: the small printed portrait on the page must be visible, not washed out by flash. Turn the flash off and use room light or daylight instead.

When the scan does work, the app shows the details it read, and this is the step people rush. Read the name, date of birth and passport number against the physical passport, character by character. The machine-readable zone uses a specific spelling of names, sometimes without spaces or with filler characters, so compare the app’s version with the printed lines, not with how you spell your name in daily life. If anything is wrong, rescan the passport rather than typing over it. Home Affairs’ own guidance says to rescan when the information is incorrect, and a typed correction that disagrees with the chip read later in the process only creates a second problem.

Why will the passport chip not read?

The chip read fails for four reasons: something is between the phone and the passport, the phone is over the wrong spot, NFC is switched off, or the chip itself cannot be read. The first three are fixable in minutes, and the order you check them in matters. Start with the easy ones before you conclude the passport is the problem.

First, check NFC. Home Affairs lists NFC as a requirement for the app, and the app cannot read a chip without it. On Android, open Settings, search for NFC, and switch it on. On iPhones there is usually no NFC switch to find, so treat an iPhone failure as a position or barrier problem, not a setting. While you are in settings, check that location services are switched on too, because the app requires them to run.

Second, take off every case. Home Affairs’ guidance for the chip read is explicit: remove any cases or covers from the passport and the phone, and hold the phone flat against the passport. A thick phone case is the first thing to rule out, and anything metal on the back of the phone, such as a card holder or a grip mount, comes off as well. The read needs the phone’s NFC antenna as close to the chip as physically possible, and even a few millimetres of plastic or leather can be enough to break it.

Third, find the chip. Different countries put the chip in different places: the front cover, the back cover, or inside a page. Home Affairs publishes separate video guides for front-cover, back-cover and data-page chips, which tells you how common this confusion is. For most passports, keep the passport closed and lay the phone flat on the front or back cover, then slide the phone slowly around the cover, top, middle and bottom, until the app reacts. Then try the other cover. When the app detects the chip you will see Hold still on Android or a yellow progress bar on an iPhone. Do not lift or slide the phone from that spot until the read finishes, because moving mid-read is what turns a found chip into another failure.

United States passports are the exception, and they catch a lot of people out. A closed US passport has shielding in the cover that blocks the read, so scanning it the normal closed way fails again and again. Open the passport to the personal data page and place the phone on the page opposite it, then slide slowly up and down. If you hold a US passport and the closed-cover method has failed three times, switch to the open method before you try anything else.

If the chip still will not read after you have tried both covers, the open method and a second phone, look at the passport itself. A small rectangular chip symbol on the front cover marks a biometric passport. Without that symbol, the passport has no chip and the app cannot read it, so no amount of repositioning will help. A damaged chip points the same way. The app offers retry after retry, but a chip that will not read on two phones is telling you to stop and use the fallback route at the end of this guide. Never bend, cut or pierce a passport to make a scan work. A damaged passport may not be accepted for travel and may need replacing, which costs far more time than the ETA itself.

Why does the live selfie keep failing?

The live selfie fails when the photo breaks one of the rules Home Affairs publishes for it, and the app is strict about them because the photo is used to confirm your identity. The rules come from Home Affairs’ own video guide for taking a live photo of yourself, and they are worth reading in full before you try again. You must be physically present for the live photo, dressed appropriately, and the photo style required is the same as a passport photo. The live photo is taken using the phone the application is being made on, not uploaded from your photo library. Stand in a well-lit space, in clear contrast against a plain, light coloured background, with the phone held at eye level. Face forward and look directly at the camera with your eyes open and visible. Move the phone slowly to position your face inside the oval frame on the screen. When the phone is in the correct position, the red oval turns green and the photograph is captured automatically.

Home Affairs also lists what makes a photo unsuitable, and each item on the list is a failure you can check for yourself before you try again. The background is not plain. Your face is covered in shadow. There is glare in the photo from bright lights. Something covers your face or eyes. There is glare or shadow falling on your face. You should remove your glasses where possible, keep objects out of the background, keep other people out of the photo, and avoid heavy makeup. If you wear glasses because you need them, that is fine, but clean lenses and no glare across the eyes matter more than most people expect. The same rules apply in spirit to a UK passport photo, and our guide to a rejected UK passport photo decodes each warning message and its fix, which readers often find useful as a second opinion.

Official rule (Home Affairs)What trips people upThe fix
Plain, light coloured backgroundDoor frames, shelves, plants or a window behind youStand against a plain light wall with nothing behind you
Well-lit space, face in clear contrastA window behind you throws your face into shadowFace the light source and take the photo in daylight
Face forward, eyes open and visibleLooking down at the phone, or squinting into the lightHold the phone at eye level and look straight at the camera
No glare or shadow on the faceOverhead lights, flash, or bright lamps behind the cameraTurn the flash off and move away from direct overhead light
Nothing covering the face or eyesHats, sunglasses, tinted glasses, hair across the eyesRemove them, and brush hair away from your eyes
No other people or objects in the photoSomeone standing behind you, or objects on a shelfClear the frame and ask others to step out of the room

Two details deserve emphasis. First, the oval matters. The app does not take the photo when you tap a button. It takes it automatically when your face sits inside the oval and the oval turns green, so move the phone slowly toward and away from your face until it locks on. Waving the phone around or tapping the screen will not help. Second, do not reuse your passport photo, and do not photograph a printed photo of yourself. The live photo must be a fresh capture of you, in the app, at that moment. A reused photo fails the identity check the app is built around, and a photo of a photo fails on lighting and glare before it even reaches that check. The same care that applies to any face search and photo privacy check applies here: a face photo is an identity document, so treat the capture with the same care you would give the passport itself.

Worked example: two real photos checked against the official rules

To show how the official rules work in practice, I checked two real photographs against Home Affairs’ published live-photo list on 14 November 2026. Neither photo was submitted to the app, and neither is presented as an app result. The check is mine, run rule by rule against the list Home Affairs publishes, so you can see exactly which rules pass and which fail. The first is a studio headshot on a white background, 683 by 1024 pixels, published under a Creative Commons licence on Flickr. The second is a street photograph taken at dusk, 1024 by 683 pixels, also published under a Creative Commons licence on Flickr.

The studio headshot passes every rule on the list. Its background is plain white, with nothing in it at all. The subject faces the camera directly, eyes open and visible, with a plain expression and no head covering. There is no shadow on the face and no glare, the lighting is even, and there are no other people or objects in the frame. The subject wears a checked shirt and is dressed appropriately. If this person stood in front of a plain wall and the app captured them this way, the oval would turn green and the photo would be taken. That is the standard to aim for: plain wall, even light, face forward, nothing extra in the frame.

Official ruleStudio headshotStreet photo at dusk
Plain, light coloured backgroundPass: plain white, nothing behind the subjectFail: street scene with cars, buildings, signs and a road behind
Well-lit, face in clear contrastPass: even studio light, no shadowFail: dusk light with a camera flash, uneven across the face
Face forward, eyes open and visiblePass: straight at the camera, eyes openPartly: face is angled, and glare sits across the glasses
No glare or shadow on the facePass: no glare anywhereFail: bright glare on the glasses and flash hotspots
Nothing covering the face or eyesPass: nothing covering the faceFail: large glasses with glare, plus a scarf up to the chin
No other people or objectsPass: nobody else in the frameFail: cars, street furniture and buildings fill the frame

The street photograph fails on nearly every rule, and it fails in the exact ways most people fail. The background is a busy street at dusk, full of cars, buildings and signs. The light is uneven, with a camera flash lighting the face from below while the street behind stays dark. The subject wears large glasses with bright glare across the lenses, and a scarf pulled up toward the chin. The face is angled rather than straight at the camera. Any one of those would be enough for the app to call the photo unsuitable. Together, they show why a quick snap outdoors almost never works, however good the camera is. If your live photo keeps failing, compare it honestly with these two: if it looks more like the street photo than the studio headshot, the room is the problem, not the app. Move to a plain wall in daylight and try again.

What if nothing works?

When the chip will not read on two phones and the selfie keeps failing after you have fixed the room, stop fighting the app and use the fallback route. The fallback depends on the passport you hold, so check the official pages rather than guessing. Holders of a UK British Citizen passport or a European passport can apply for the eVisitor, subclass 651, instead. It is free, it runs through ImmiAccount in an ordinary browser, and no chip read is involved. The visa you get is functionally the same for a short visit, with up to three months per stay. One exception to note: a British National (Overseas) passport cannot be used for the eVisitor, according to Home Affairs. If you hold a UK eVisa rather than an ETA, the photo rules there are different again, and our guide to UK eVisa photo rules covers the three ways those rules differ from passport photo rules.

For any other passport, the fallback is the Visitor visa, subclass 600, also through ImmiAccount. It costs more and takes longer than an ETA, so treat it as the last resort, but it exists precisely for people the app cannot process. If your problem is a photo upload rather than the app itself, the failure pattern is often the same file and framing trouble, and our guide to UK visa photo upload failures walks through the file fixes that apply on the browser route too.

Before you switch routes, try one more phone. Some phones have weak or awkwardly placed NFC antennas, and a different phone often reads a chip that yours cannot. A friend or family member can run the application on their phone, but the rules require you to be physically with them: you must take the live selfie yourself and your passport must be there to scan. There is no remote apply-on-behalf route, not even through a travel agent. And remember the one-sitting rule from the start of this guide: if you switch phones, you start the application from the beginning, so pick the phone that can read the chip and stay on it.

One warning about money. The only charge for an ETA is the AU$20 service fee inside the official app. If a website charged you more than AU$20, or took your application on a web form, that was not the official route. Home Affairs warns travellers about this, and the official app is the only channel. Never pay a third-party site to fix a photo problem, and never send your passport details to a site that promises to lodge the application for you.

Common Australian ETA app photo problems that waste an afternoon

Most Australian ETA app photo problems come from a short list of avoidable mistakes, and nearly all of them are fixed before you open the app rather than inside it. Run through this list first, and you will save yourself the repeated failures that fill the forums.

  • Leaving the phone case on. A thick case puts distance between the NFC antenna and the chip. Take it off, along with the passport cover, before the first attempt, not the fifth.
  • Scanning under a ceiling light. Overhead light throws glare across the glossy data page and shadow across your face. Use daylight from a window to your side, or a lamp at face height.
  • Holding the passport instead of laying it flat. A held passport moves, and fingers cover the text the app needs. Lay it on a table and let it sit still.
  • Sliding the phone too fast. The chip read needs a slow slide and a still hold once the app reacts. Quick sweeps across the cover find nothing.
  • Trying the selfie outdoors. Streets, gardens and car parks all fail the plain background rule. A plain light wall indoors is the only background that works reliably.
  • Reusing the passport photo. The live photo must be a fresh capture in the app. A photo of a printed photo fails on glare before it reaches any identity check.
  • Submitting a flagged photo and hoping. If the app warns you the photo does not meet the rules, retake it. A flagged photo that goes through anyway can delay or sink the application, and the AU$20 fee is not refunded.
  • Paying a third-party site. The official route is the free AustralianETA app and a AU$20 service fee inside it. A site charging more is not Home Affairs.

Fix the setup, work the three steps in order, and check the two real photos above against your own attempt. The app is strict, but it is strict about a short published list, and every item on that list has a fix you can do yourself in a few minutes. Home Affairs publishes short video guides for each step, and if you are stuck on one step, watching the video for that step is the fastest way to see the technique done properly. The full conditions, including the current eligible passport list and the fee, sit on the official ETA (subclass 601) page, which is the page to check before you travel. India’s e-Visa photo rules work the same file-first way, and our India e-Visa photo rejected guide works through the square JPEG rule, the 10 KB to 1 MB limit and the re-upload route.

FAQs

Can I apply for an Australian ETA on a website instead of the app?

No. The ETA (subclass 601) is applied for only through the free AustralianETA app, published by the Department of Home Affairs. There is no web form for it. If a website offers to take your ETA application, that is a third-party service, not the official route, and it will charge you more than the AU$20 service fee.

Does my phone need NFC for the Australian ETA app?

Yes. Home Affairs lists NFC as a requirement, because the app reads the chip inside your passport with it. On Android, switch NFC on in Settings. On iPhones there is usually no NFC switch, so a failure there is a position or barrier problem. A phone without NFC cannot complete an ETA application.

Why does the app say my live photo is unsuitable?

The photo breaks one of the rules Home Affairs publishes: the background is not plain, your face is in shadow, there is glare, something covers your face or eyes, or other people or objects are in the frame. Move to a plain light wall in daylight, take off your glasses where possible, and hold the phone at eye level.

Can I use my passport photo as the live photo?

No. The live photo must be a fresh capture of you, taken in the app at that moment, in the same style as a passport photo. Reusing the photo printed in your passport, or photographing a printed photo, fails the identity check the app is built around and fails on lighting and glare as well.

What happens if I close the app before submitting?

The unsubmitted application is deleted, so you start again from the beginning. Home Affairs designed the app this way for privacy. Finish the whole application in one sitting, on the phone that can read your passport chip, and do not switch devices halfway through.

My passport has no chip symbol. Can I still get an ETA?

Not through the app, because the app cannot complete without a successful chip read. If you hold a UK British Citizen or European passport, apply for the free eVisitor (subclass 651) through ImmiAccount instead. Otherwise, apply for a Visitor visa (subclass 600) through ImmiAccount. Both run in a browser with no chip involved.

Ali Butt is the lead writer and SEO specialist at Image Search Techniques, where he covers reverse image search, visual search, and online image verification. With over four years of experience in SEO and content, he writes practical, hands-on guides that help readers trace a photo to its source, identify people, products, plants and brands from a picture, protect their own images online, and spot catfish, fakes and AI-generated images across Google, Yandex, Bing, TinEye and more.

Leave A Reply